Fuel Cell Tank Top Plate, 28cm x 22cm Racing Road Rally Drag
Universal Racing Fuel Cell Access Cover Pump Opening Plate. Universal Racing Fuel Cell Access Cover. Designed for custom fuel cell builds, retrofit upgrades, and motorsport fuel tank applications, this racing fuel cell access cover creates a removable top opening so you can access the inside of the tank, install or service a fuel pump, inspect the tank, or complete a custom fuel system setup. Suitable for aluminium fuel cells, plastic fuel tanks, and universal race car applications where correct installation is possible. Why This Fuel Cell Cover Belongs On Your Build.
Designed for universal fuel cell and fuel tank applications, ideal for race cars, custom builds, drift cars, track cars, and retrofit projects. Creates a removable top access point so you can reach the inside of the tank for pump installation, servicing, inspection, or maintenance. Manufactured from T-6061 aluminium for strong, lightweight, and durable performance fuel system construction.
Ideal when modifying an aluminium or plastic fuel cell to accept an internal pump setup or custom fuel system hardware. Features AN6 thread sizing, making it suitable for common performance fuel system plumbing setups. Available in blue / black finish, giving your fuel system a clean motorsport look while adding practical service access. Racing Fuel Cell Cover / Fuel Tank Access Plate.
Retrofit / Upgrade / Fuel Pump Access. Universal Fuel Tank / Fuel Cell Applications. Racing / Motorsport / Custom Fuel System Builds. 1 × Racing Fuel Cell Access Cover As Shown. This universal racing fuel cell access cover is designed to provide a removable opening on the top of a fuel cell or fuel tank. It is ideal for custom builds where access to the inside of the tank is required for installing, servicing, or inspecting an internal fuel pump and related fuel system components. The cover is manufactured from T-6061 aluminium for strength and lightweight performance. With a 285mm × 220mm size and AN6 thread sizing, it is suitable for many universal motorsport fuel cell applications, aluminium tanks, plastic tanks, race cars, track cars, drift cars, drag builds, kit cars, and custom fuel system projects. This is a retrofit / upgrade part and is designed for custom installation. Cutting, drilling, sealing, and correct fuel-safe fitting methods may be required depending on your tank material and application. Track, drift, drag, rally, and race car builds.Vehicles requiring removable tank access for internal pump service. Important: This is a universal retrofit part. Professional installation is strongly recommended. The tank may require cutting, drilling, sealing, and pressure/leak testing after installation. Always use fuel-safe seals, fittings, and installation methods suitable for your tank material and fuel type.
1 × Racing Fuel Cell Access Cover. Supplied as shown in the photos. Professional installation is highly recommended. Please confirm measurements before purchasing. Universal part - modification may be required.
Fuel tank must be properly cleaned, prepared, sealed, and leak tested after installation. Please allow 1-3mm variation due to manual measurement. Suitable installation depends on fuel cell material, thickness, shape, and available mounting surface. Add Proper Access To Your Fuel Cell. Built for motorsport builders who need a strong removable top cover for fuel pump access, tank inspection, and custom fuel system upgrades.